EPI Performance Wheel Shaft - WE382949

• *Tool will not work on the clutches while they are on the machine but can be used to service and inspect the primary clutch once it is off the machine

  This simple tool allows you to change the spring and weights in your Polaris primary clutch without removing it from the motor! Simply remove the clutch retaining bolt, thread the EZ Clutch Tool into the clutch shaft and tighten the adjustment bolt on the tool to compress the clutch. Now you can spin the clutch to each weight pin and change weights! Need to change the spring also? No problem!
  The tool is designed to allow the clutch cover to be removed also. With the EZ Clutch Tool in place, remove the cover bolts (mark the cover for reinstallation orientation first), and loosen the adjustment bolt on the tool to back the cover off and gain access to the spring. This is a must-have tool for the tuner to make quick and E-Z changes.
  
  Works with all Polaris primary clutches that use pullers PCP-1, PCP-8, PCP-9 and PCP-12

⚠ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.